TMI Technical Materials, Inc.   a Brush Engineered Materials company         •site map     •home

Metal Properties
Selection Guide &
Tech Papers
•Metal Properties Selection Guide
    - Copper
    - Beryllium Copper
    - Brass
    - Bronze
    - Cupro Nickel
    - Spinodal Alloy
    - Nickel Silver
    - Aluminium
    - Glass Sealing
    - Nickel
    - Stainless Steel
    - Solder Alloy
    - Precious Alloys
•TMI Papers



Nickel

  Nickel
UNS N02200 N02201 N02270 N04400
  Nickel 200
99.0 Ni .15max C		 Nickel 201
99.0 Ni .02max C		 Nickel 270
99.98 Ni		 Monel 400
65 Ni 35 Cu
Density (1) .321 .321 .321 .319
Mod.of Elast. (2) 30 30 30 26
Elect.Cond. (3) 18 18 18 3.4
Thermal Cond. (4) 94 94 94 12.6
Coefficient of
Therm Expan. (5)		 8.0 8.0 8.0 8.8
Cost Factor (6) 4.08 4.10 4.3 3.61
Annealed
UTS (7)
YS (8)
EL (9)
HV (10)		 N02200
55-75
20-45
35-55
115 max		 N02201
50-60
12-28
40-50
102 max		 N02270
45-55
10-25
40-55
---		 N04400
70-85
25-45
35-50
133 max
1/4 Hard
UTS
YS
EL
HV		 N02200
65-85
42-62
27-36
126-151		 N02201
58-70
28-43
34-45
106-130		 N02270
50-65
20-34
35-48
85-112		 N04400
75-95
40-80
20-40
133-160
1/2 Hard (H12)
UTS
YS
EL
HV		 N02200
75-95
55-75
20-28
148-171		 N02201
68-80
41-58
27-36
126-151		 N02270
60-70
32-44
30-45
108-130		 N04400
80-100
60-90
14-30
157-188
3/4 Hard
UTS
YS
EL
HV		 N02200
82-100
66-86
14-22
167-193		 N02201
76-88
54-68
20-29
145-171		 N02270
68-80
42-58
25-37
125-155		 N04400
90-110
73-102
6-20
183-209
Hard (H14)
UTS
YS
EL
HV		 N02200
90-105
70-90
10-16
188-215		 N02201
85-96
66-80
12-22
168-193		 N02270
78-90
55-70
15-28
145-175		 N04400
100-120
90-110
2-15
205-234
Ex. Hard
UTS
YS
EL
HV		 N02200
---
---
---
---		 N02201
---
---
---
---		 N02270
---
---
---
---		 N04400
---
---
---
---
Spring (H16)
UTS
YS
EL
HV		 N02200
105 min
90 min
2-10
215 min		 N02201
96 min
80 min
3-12
193 min		 N02270
90 min
70 min
4 min
175 min		 N04400
120 min
110 min
1-10
234 min
Ex. Spring (H18)
UTS
YS
EL
HV		 N02200
---
---
---
---		 N02201
---
---
---
---		 N02270
---
---
---
---		 N04400
---
---
---
---

NOTES

(1)Lbs.per cubic inch @ 60°F (annealed)
(2)Elastic modulus in tension x 106 P.S.I.
(3)% IACS at 68°F
(4)BTU per sq. ft. per hour per °F at 68°F
(5)Inches per inch x 10-6 from 68°F to 572°F
(6)Approximate relative cost based on ETP copper as 1.00; .025" x 1.00" strip in 10 m lbs. quantity
(7)Ultimate tensile strength x1000 P.S.I.
(8)0.2% offset yield strength x 1000 P.S.I. Yield strengths are not used or accepted as specifications by brass mills; but, because of their usefulness, values are given here for design purposes
(9)% elongation in 2". Elongation values vary considerably with thickness. The rolled temper data given are based on thicknesses ranging from .010" to .035" strip.
(10)Approximate Vickers hardness - Hv unless otherwise specified.

NOTE: The properties on these charts are provided for reference only.
•About TMI    •Products    •Markets / Applications    •Metal Properties Guide / Tech Papers    •Contact Us    •Brochures    •Site Map    •Home   

TMI 5 Wellington Rd. Lincoln, RI 02865 Phone: 401-333-1700 Fax: 401-333-2848