TMI Technical Materials, Inc.   a Brush Engineered Materials company         •site map     •home

Reroll & Alloys
•Copper
•High Copper
•Beryllium Copper
•Brass
•Bronze
•Copper Nickel
•Steels
•Aluminum
•Zinc
•Nickel
•Niobium
•Tantalum
•Titanium
•Zirconium
•Low Expansion Alloys
•Precious Metal Alloys



Reroll Capabilities and Alloys / Nickel and Nickel Alloys







Alloys available are: N0220, N02233, N04400
(Monel 400), N05500 (Monel 500), K94100 (A-42),
K95200 (A-52), K94610 (Kovar), K93600 (Invar)

Gauges from .005" - .062" x 6.000" maximum
width and .0025" - .005" x 3.500" maximum width

Heavier gauges and wider widths are dependent
upon material availability.

Minimum buy is generally 100 lbs.









If you are looking for
something outside
the parameters listed,
please give us a call!

We may have a solution!





Request a Quote

N02201

201

99.0 Ni
.02 Max
C 		N02270

270

99.98N		 N04400

Monel™*400


65Ni 35Cu		 N06600

Inconel™*600
76 Ni
16 Cr
8 Fe
Density (1)
Modulus (2)
Elect. Cond. (3)
Therm. Cond. (4)
Therm. Exp. (5)
ASTM (6)		 .321
30
18
94
8.0
B162 		.321
30
18
50
8.6 		.319
26
3.4
12.6
8.8 		.305
31
1.8
8.6
7.6
B168
Annealed
UTS (7)
YS (8)
EL (9)
HV (10)
50-65
12-28
30-50
120 Max.
45-55
10-25
40-55
70-85
25-45
35-50
133 Max.
80-100
40 Nom.
35-55
150 Nom.
1/4 Hard
UTS
YS
EL
HV
60-75
45-66
17-26
120-150
50-65
20-34
35-48
85-112
75-95
40-80
20-40
133-160
1/2 Hard
UTS
YS
EL
HV
76-92
60-84
8-21
140-170
60-70
32-44
30-45
108-130
80-100
60-90
14-30
157-188
100-125
60-100
10-25
235 Nom.
3/4 Hard
UTS
YS
EL
HV
85-100
70-90
3-8
160-190
68-80
42-58
25-37
125-155
90-110
73-102
6-20
183-209
Hard
UTS
YS
EL
HV
90 Min.
80 Min.
2 Min.
180-220
78-90
55-70
15-28
145-175
100-120
90-110
2-15
205-234
120-150
90-125
2-15
275 Nom.
Extra Hard UTS
YS
EL
HV



Spring
UTS
YS
EL
HV
96 Min.
85 Min.
1 Min.
193 Min.

120 Min.
110 Min.
1-10
234 Min.
145-170
120-160
2-10
320 Nom.
Ex. Spring
UTS
YS
EL
HV






CHART FOOTNOTES
1 Lbs. per cubic inch @ 68°F (annealed)
2 Elastic modulus in tension x 106 P.S.I.
3.% IACS at 68°F (annealed)
4. BTU per foot per hour per °F at 68°F (annealed)
5. Inches ber inch x 10-6 from 68°F to 572°F
6. Reference specification for strip
7. Ultimate tensile strength x 1000 P.S.I.
8. 0.2% offset yield strength x 1000 P.S.I. Yield strengths are not used or accepted as specifications by brass mills; but because of their usefulness, values are given here for design purpose.
9. % elongation in 2". Elongation values vary considerably with thickness. The rolled temper data given are base on thicknesses ranging from .010" to .035" strip.
10. Approximate Vickers hardness - HV unless otherwise specified.
11. Standard heat treatment 2 hrs. at 600°F (3 hrs. @ 600°F for annealed temper)
12. Standard heat treatment 2 hrs. at 700°F (2 hrs. @ 675°F for TS04)




•About TMI    •Products    •Markets / Applications    •Metal Properties Guide / Tech Papers    •Contact Us    •Brochures    •Site Map    •Home   

TMI 5 Wellington Rd. Lincoln, RI 02865 Phone: 401-333-1700 Fax: 401-333-2848